• Providing Smart, Secure, Energy Efficient Building Solutions Since 1991

You have no items in your shopping cart.

Pelco Environmental Mini Dome, WDR, Low Light, 2MPx, Vandal-Resistant, Pendant Mount

Pelco Environmental Mini Dome, WDR, Low Light, 2MPx, Vandal-Resistant, Pendant Mount

SKU - IME219-1EP

- Environmental
- 3 ~ 9 mm Focal Range
- Pendant
- Light Gray
- 2 MPx (1080p)
- Next Generation SureVision Technology, Including:
     – True Wide Dynamic Range (WDR)
     – Advanced Low-Light Performance
     – Anti-Bloom Technology
- Autofocus Varifocal 3 ~ 9 mm MPx Lense
- Power over Ethernet (PoE), IEEE 802.3af
- Adaptive Motion Detection and Camera Sabotage Analytics
- Local Storage (Micro SD)
- Compatible with Pelco and Third-Party Video Systems

Usually Ships: 3 - 5 Days

Availability: In stock



Sarix Enhanced Range with SureVision
Sarix® Enhanced (E) range cameras feature SureVision technology, delivering high definition (HD) resolution, consistent color science, fast processing power, and simultaneous advanced low-light performance with wide dynamic range (WDR) and antibloom  technologies. New advancements include 3D noise filtering, smooth response to illumination changes, and improved tone mapping to retain color accuracy and overall image contrast.

Designed to install quickly, the cameras include autofocus, motorized zoom, built-in analytics, and other advanced features needed for demanding security applications.

The IME Series contains an integrated varifocal 3 ~ 9 mm or 9 ~ 22 mm MPx autofocus lens. All models include a camera in a compact in-ceiling, surface mount, or pendant enclosure that is ready to install. The vandal-resistant and environmental models feature a sturdy metal design that is both vandal- and tamper-resistant. The environmental model features worry-free use in a wide range of environmental operating conditions. All in-ceiling models have a back box that is plenum rated per 2008 NEC article 300.22(C)(2).

The IME Series supports multiple simultaneous video streams with up to two different configurations. The streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The IME Series offers real-time video (30 ips) with full HD resolution (up to 3 MPx) using H.264 compression for optimized bandwidth and storage efficiency The streams can be configured to a variety of frame rates, bit rates, and group of pictures (GOP) structures for additional bandwidth administration.

Open and Integrated
Sarix Enhanced range cameras seamlessly connect to Pelco video management systems such as Endura® version 2.0 (or later), and Digital Sentry® version 7.3 (or later). Sarix Enhanced range cameras integrate with major third-party video management systems through the Pelco API, and other third-party software and systems through the open ONVIF Profile S standard.

Built-In Analytics
Sarix Enhanced range cameras feature adaptive motion detection, allowing the camera to record or send an alarm when there is motion in selected zones or in an entire scene. A camera sabotage alarm is triggered if the lens is obstructed, or when the camera is repositioned.

Convenient Power
Sarix Enhanced range cameras are designed with Power over Ethernet (PoE) to reduce costs and simplify planning, wiring, and installation. PoE functionality works with PoE-enabled network switches or power injectors, eliminating the need for separate power supplies and cabling, and increasing camera fail safety through an uninterruptable power supply (UPS).

Imaging Device 1/3"
Type Imager: CMOS
Imager Readout Progressive scan
Resolution (Highest) 2 MPx (1080p)
Signal-to-Noise Ratio >60 dB
Range Electronic Shutter: 1 to 1/77,000 sec
True Wide Dynamic: Up to 100 dB
White Balance: 2,000 to 10,000 K 1
Sensitivity f/1.2; 2,850 K; SNR >20 dB
Color (33 ms): 0.1 lux
Color (500 ms): 0.005 lux
Mono (33 ms): 0.05 lux
Mono (500 ms): 0.0013 lux
Mechanical IR Cut Filter (On/Off/Auto selectable), with different set points on lux
Lens Type Built-in, varifocal
Focal Length 3 to 9 mm, f/1.2
Focus Autofocus, motorized
Zoom Remote
Auto Iris DC drive P-iris lens
Field of View 4:03
Diagonal: 105° (W) x 38° (T) Horizontal: 84° (W) x 30° (T) Vertical: 63° (W) x 23° (T)
Diagonal: 97° (W) x 35° (T) Horizontal: 84° (W) x 30° (T) Vertical: 47° (W) x 17° (T)
Streaming Bidirectional: Full or half duplex
Input/Output Line level/external microphone input; 600 Ω, 1 Vpp maximum signal level
Compression G.711 PCM 8-bit, 8 kHz mono at 64 kb/s
Video Streams Multiple simultaneous streams with up to 2 different configurations plus service stream; the secondary stream is variable based on the setup of the primary stream
Aspect Ratio 16:09
Frame Rate Up to 30, 25, 15, 12.5, 10, 5, 1 (depending on the coding, resolution, and stream configuration)
Video Encoding H.264 High, Main, or Base profiles; and MJPEG
Control Bit Rate: CVBR (Constrained variable bit rate), CBR (constant bit rate), and VBR (variable bit rate) with target range
Services JPEG stream; the aspect ratio will be consistent with the independent streams
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP) 2
Users Unicast: Up to 20 simultaneous users depending on the resolution settings
Multicast: Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
Minimum System Requirements
Processor Intel Core i3 processor, 2.4 GHz
Operating System Microsoft Windows 7 (32- and 64-bit), or Window Vista, or Mac OS X 10.4 (or later)
Memory 4 GB RAM
Network Interface 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics 3
Media Player Pelco Media Player or QuickTime 7.6.5 for Windows 7, XP, or Vista; or QuickTime 7.6.4 for Mac OS X 10.4 (or later) 4
Analytics Pelco Interface: WS5200 Advanced System Management
Software on an Endura 2.0 (or later) system
Open API: The Pelco API can transmit behavior alarm data to third-party applications
Integration Pelco System Integration: Endura 2.0 (or later)
Digital Sentry 7.3 (or later)
Open API: Pelco API or ONVIF Profile S
Mobile Application: Integrated with Pelco Mobile Application
Port Network: RJ-45 connector for 100dBase-TX Auto MDI/MDI-X
Accessory: Micro B USB connector for Pelco accessories
Cable Type Cat5 or better for 100dBase-TX
Input Power PoE (IEEE 802.3af, Class 3)
Power Consumption 8.5 W nominal 5
Current Consumption 350 mA maximum
Local Storage Micro SD (sold separately)
Alarm Unsupervised: Detects open or closed alarm state
Supervised: Detects open and short alarm state with external 1 kΩ resistor
Alarm Input 3.5 VDC maximum, 3.5 mA maximum
Relay Output ±32 VDC maximum, 150 mA maximum
Dome Attenuation Clear: f/0.0 light loss
Smoked: f/1.0 light loss
Adjustments Manual
Pan: 355°
Tilt: 180°
Rotation: 360°
Operating Temperature -40 to 122°F (-40 to 50°C)
Cold Start -4°F (-20°C)
Storage Temperature 14 to 140°F (-10 to 60°C)
Operating Humidity 10 to 95%, RH condensing
Storage Humidity 20 to 80%, RH non-condensing
Impact Resistance K10++ (50J) per IEC 62262
Shock and Vibration EN50155 Category 1, Class B; IEC 60068:2-6 and 2-27
Dimensions (Ø x H) 6.22 x 4.62" (16.79 x 11.73 cm)
Weight 3.3 lb (1.5 kg)

Customer Reviews

No reviews yet

Write Your Own Review

You're reviewing: Pelco Environmental Mini Dome, WDR, Low Light, 2MPx, Vandal-Resistant, Pendant Mount